Sol+Guard™ 500 Micron Pool Cover

Description

Sol+Guard™  Solar Pool Cover with GeoBubble™ Technology by Plastipack – The UK’s largest and best supplier of Pool Cover Material

For years we have had requests from clients for a change or alternate colour choice which we proudly now offer. GeoBubble was created in 2012 in an attempt to create a better performing and longer lasting pool cover material.

Is this the best pool cover material being used in Australia? It is possible… And below is why

• GeoBubble has a unique shape with two bubbles essentially joined together by a structural waistline centre section. It has a distinct peanut looking shape.
• There are no sharp corners resulting in weak or thin sections of the material. With their estimates that the material is 50% thicker than the thinnest sections of the “traditional” pool cover bubble shape
• This uniformity of thickness across the bubble wall is said to provide a stronger resilience to UV Rays and Chemical attack
• Throughout the industry it has always been regarded that the lighter the colour the more Infrared Light is allowed to pass through the cover and into the pool. The darker the colour the more heat is retained by the cover.
• The larger the air-pocket between the bottom layer of plastic and the top layer of plastic, the greater the thermal layer created to retaining heat.
• Sol+Guard™ 500 Micron Solar Pool Cover might just be the perfect combination of colour and bubble size to maximise Solar Gains whilst optimising Heat Retention.

Sol+Guard™ 500 Micron Solar Pool Cover

• Clear top layer with light translucent Blue bottom bubble layer, allowing for excellent Solar Gains
• Potentially increasing the water temperature by as much as 8 Degrees Celsius
• With a larger air pocket between the top and bottom layers, the Sol+Guard™ material has excellent heat retention properties.
• Tested to have an R Value of 0.072 m2/K (compared to the leading Australian made product of 0.067m2/K)
• 2.0m panels meaning less weld lines running across the pool (compared to the leading Australian made product with a 1.27m panel)
• Stop evaporation by as much as 98%
• Reduce chemical consumption by up to 40%
• Keep out the leaves and debris that fall onto the pool
• 8 Year Pro Rata Warranty – backed by Manufacturer of the Raw Bubble.
• Smart Water Mark Approved

INSTALLATION GUIDE

• Bubble Side down
• Use a sharp pair of scissors
• Try not to cut (chomp) the pool cover where possible, slice the pool cover by pushing the scissors through the material
• Score the pool cover first in the position you want to cut. Then slice.
• If you are attaching your new pool cover to an existing roller, you will need to purchase a refit kit.

Updated Pool Cover Installation Video

(Old) Pool Cover Installation Video